systemctl (システムシーティーエル)とは
systemctlは、System Control (システムコントロール) の略です。
何もオプションを付けなければ、実行中のサービス一覧を返します。# systemctl※このコマンドはRedHat系のコマンドで、CentOSはバージョン7からです。
systemctlのヘルプ
コマンド# systemctl -hsystemctl [OPTIONS...] {COMMAND} ...
Query or send control commands to the systemd manager.
-h --help Show this help
--version Show package version
--system Connect to system manager
-H --host=[USER@]HOST
Operate on remote host
-M --machine=CONTAINER
Operate on local container
-t --type=TYPE List units of a particular type
--state=STATE List units with particular LOAD or SUB or ACTIVE state
-p --property=NAME Show only properties by this name
-a --all Show all loaded units/properties, including dead/empty
ones. To list all units installed on the system, use
the 'list-unit-files' command instead.
-l --full Don't ellipsize unit names on output
-r --recursive Show unit list of host and local containers
--reverse Show reverse dependencies with 'list-dependencies'
--job-mode=MODE Specify how to deal with already queued jobs, when
queueing a new job
--show-types When showing sockets, explicitly show their type
-i --ignore-inhibitors
When shutting down or sleeping, ignore inhibitors
--kill-who=WHO Who to send signal to
-s --signal=SIGNAL Which signal to send
--now Start or stop unit in addition to enabling or disabling it
-q --quiet Suppress output
--no-block Do not wait until operation finished
--no-wall Don't send wall message before halt/power-off/reboot
--no-reload Don't reload daemon after en-/dis-abling unit files
--no-legend Do not print a legend (column headers and hints)
--no-pager Do not pipe output into a pager
--no-ask-password
Do not ask for system passwords
--global Enable/disable unit files globally
--runtime Enable unit files only temporarily until next reboot
-f --force When enabling unit files, override existing symlinks
When shutting down, execute action immediately
--preset-mode= Apply only enable, only disable, or all presets
--root=PATH Enable unit files in the specified root directory
-n --lines=INTEGER Number of journal entries to show
-o --output=STRING Change journal output mode (short, short-iso,
short-precise, short-monotonic, verbose,
export, json, json-pretty, json-sse, cat)
--plain Print unit dependencies as a list instead of a tree
Unit Commands:
list-units [PATTERN...] List loaded units
list-sockets [PATTERN...] List loaded sockets ordered by address
list-timers [PATTERN...] List loaded timers ordered by next elapse
start NAME... Start (activate) one or more units
stop NAME... Stop (deactivate) one or more units
reload NAME... Reload one or more units
restart NAME... Start or restart one or more units
try-restart NAME... Restart one or more units if active
reload-or-restart NAME... Reload one or more units if possible,
otherwise start or restart
reload-or-try-restart NAME... Reload one or more units if possible,
otherwise restart if active
isolate NAME Start one unit and stop all others
kill NAME... Send signal to processes of a unit
is-active PATTERN... Check whether units are active
is-failed PATTERN... Check whether units are failed
status [PATTERN...|PID...] Show runtime status of one or more units
show [PATTERN...|JOB...] Show properties of one or more
units/jobs or the manager
cat PATTERN... Show files and drop-ins of one or more units
set-property NAME ASSIGNMENT... Sets one or more properties of a unit
help PATTERN...|PID... Show manual for one or more units
reset-failed [PATTERN...] Reset failed state for all, one, or more
units
list-dependencies [NAME] Recursively show units which are required
or wanted by this unit or by which this
unit is required or wanted
Unit File Commands:
list-unit-files [PATTERN...] List installed unit files
enable NAME... Enable one or more unit files
disable NAME... Disable one or more unit files
reenable NAME... Reenable one or more unit files
preset NAME... Enable/disable one or more unit files
based on preset configuration
preset-all Enable/disable all unit files based on
preset configuration
is-enabled NAME... Check whether unit files are enabled
mask NAME... Mask one or more units
unmask NAME... Unmask one or more units
link PATH... Link one or more units files into
the search path
add-wants TARGET NAME... Add 'Wants' dependency for the target
on specified one or more units
add-requires TARGET NAME... Add 'Requires' dependency for the target
on specified one or more units
edit NAME... Edit one or more unit files
get-default Get the name of the default target
set-default NAME Set the default target
Machine Commands:
list-machines [PATTERN...] List local containers and host
Job Commands:
list-jobs [PATTERN...] List jobs
cancel [JOB...] Cancel all, one, or more jobs
Snapshot Commands:
snapshot [NAME] Create a snapshot
delete NAME... Remove one or more snapshots
Environment Commands:
show-environment Dump environment
set-environment NAME=VALUE... Set one or more environment variables
unset-environment NAME... Unset one or more environment variables
import-environment [NAME...] Import all or some environment variables
Manager Lifecycle Commands:
daemon-reload Reload systemd manager configuration
daemon-reexec Reexecute systemd manager
System Commands:
is-system-running Check whether system is fully running
default Enter system default mode
rescue Enter system rescue mode
emergency Enter system emergency mode
halt Shut down and halt the system
poweroff Shut down and power-off the system
reboot [ARG] Shut down and reboot the system
kexec Shut down and reboot the system with kexec
exit Request user instance exit
switch-root ROOT [INIT] Change to a different root file system
suspend Suspend the system
hibernate Hibernate the system
hybrid-sleep Hibernate and suspend the systemコマンドオプション
start サービス名
サービスを起動します。コマンド例
#systemctl start httpdrestart サービス名
サービスを再起動します。コマンド例
#systemctl restart httpdstop サービス名
サービスを停止します。コマンド例
# systemctl stop httpdstatus サービス名.service
サービスが起動中か調べます。コマンド例
# systemctl status httpdis-enabled サービス名.service
サービスが自動起動になっているか調べます。コマンド例
# systemctl is-enabled httpd.serviceenable サービス名.service
自動起動に設定します。コマンド例
# systemctl enable httpd.servicedisable サービス名.service
自動起動しないに設定します。コマンド例
# systemctl disable httpd.servicelist-unit-files --type=service
全てのサービスとその状態を表示します。コマンド
# systemctl list-unit-files --type=service全て表示するには「↓」キーを押します。
コマンド画面に戻るには、「Ctrl+c」か「q」キーを押します。
list-units --type=service
現在起動中のサービスを確認します。コマンド
# systemctl list-units --type=service